{"product_id":"light-kit-for-lego-hubble-space-telescope-11382-ver-2","title":"ZENE Bricks Light Kit for LEGO Hubble Space Telescope #11382 (Ver.2)","description":"\u003ch4\u003eA Small Orbit Scene\u003c\/h4\u003e\n\u003cp\u003eThe LEGO Hubble Space Telescope #11382 Ver.2 already has the right subject for a night display: NASA\/ESA hardware, wide solar arrays, and galaxy artwork under the stand. This ZENE Bricks kit is for builders who want that space story visible after dinner, during a documentary night, or as a sharper astronomy gift.\u003c\/p\u003e\n\u003cp\u003eBut when the sun goes down? The pale telescope body can flatten out quickly. The light kit adds a few deliberate color points instead of trying to flood the model. Warm light stays near the service rail, blue light handles the colder space-facing areas, and the base gets enough glow to show why Hubble matters in the first place. After the main build, the model often sits as a quiet gray shape; the lighting gives it a reason to stay out later.\u003c\/p\u003e\n\u003ciframe width=\"1337\" height=\"388\" src=\"https:\/\/www.youtube.com\/embed\/BApZ7t4ltU8\" title=\"ZENE Bricks Light Kit for LEGO Hubble Space Telescope #11382 (Ver.2)\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch4\u003eFront Aperture\u003c\/h4\u003e\n\u003cp\u003eI would start at the round front opening. The blue light inside the aperture gives the lens assembly a clean center, while the dark internal pieces still keep their shadows. The gray rim remains readable, so the front does not become one bright circle. From a three-quarter angle, that single blue point pulls attention to the optics before the eye moves along the body. It is a small detail, but on this model the front face needs that kind of precision.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlue light sits inside the circular optics bay.\u003c\/li\u003e\n\u003cli\u003eWarm yellow tracks the gold rail along the telescope body.\u003c\/li\u003e\n\u003cli\u003eA small red side marker cuts through the light-gray shell.\u003c\/li\u003e\n\u003cli\u003eBlue corner points mark the outer solar panel edges.\u003c\/li\u003e\n\u003cli\u003eBase lighting sits behind the printed galaxy tiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe warm strip along the side is more physical. It follows the gold tubing, breaks around clips, and makes the long white cylinder easier to read without repainting the whole model in light. The red marker is smaller, almost a blink on the side wall. That works here. On a science model, one little red note can do more than another bright strip.\u003c\/p\u003e\n\u003ch4\u003eBase and Body Notes\u003c\/h4\u003e\n\u003cp\u003eThe stand deserves a longer look because it carries the Hubble part of the story. Blue light under the front edge catches Pillars of Creation, Whirlpool Galaxy, and The Butterfly Nebula, so the printed tiles are easier to notice from standing height. I would not bury that in a generic display line. The named galaxy art tells a guest what this telescope was built to study. It also gives the black base a bit of color, helpful when the model sits on a dark tabletop or near other space sets. Beside a star chart or mission patch, that lower glow makes the setup look intentional, even if the whole scene only takes one small space.\u003c\/p\u003e\n\u003cp\u003eOut at the solar arrays, the blue corner points are more about edges than drama. They show the width of the panels and leave the printed grid alone. The effect is especially good from the side, where the body, panels, and stand can otherwise blend into one long shape. Blue reflections below the arrays add a little spill on the surface, but the panels still look like solar panels, not light boards.\u003c\/p\u003e\n\u003cp\u003eRoute the fine wires along places that already have visual lines: body seams, panel supports, the aperture area, and the lower base edge. Around the gold rail, keep the cable close to the pipework. On the smooth light-gray shell, a slow pass with the wires matters more than extra parts. Set the finished Hubble beside a star map, a space-book stack, or a small mission-control build, and the model keeps its calm telescope shape while the details become easier to pick out.\u003c\/p\u003e","brand":"ZENE Bricks","offers":[{"title":"Classic Version","offer_id":51795006750998,"sku":"100-11382-cv","price":45.98,"currency_code":"USD","in_stock":true},{"title":"Remote Control Version","offer_id":51795006783766,"sku":"100-11382-rcv","price":55.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/6123\/9238\/files\/zenebricks_Light_Kit_for_LEGO_Hubble_Space_Telescope_11382_011.webp?v=1788084006","url":"https:\/\/www.zenebricks.com\/products\/light-kit-for-lego-hubble-space-telescope-11382-ver-2","provider":"ZENE Bricks","version":"1.0","type":"link"}